Research-based equipment guides
Aquarium equipment not working? Find the fix.
Step-by-step checks for heaters and filters, built from the manufacturer’s own manuals. Safety points first, with sources and a last-checked date on every guide.
- Built from official manuals
- Safety points first
- Sources and dates on every guide
Start with your equipment
Pick the equipment that’s giving you trouble.
Air pumps
No air, weak airflow, check valves and placement, from the Fluval manual.
Latest guides
Fresh from the manuals. Each one lists its sources and the date we checked them.
- Will an AquaClear Fit Your Tank? Rim Thickness and Water Level Limits
Will an AquaClear fit your tank? The manual lists maximum rim thickness, minimum water level, water temperature limit and indoor-only use. - AquaClear Media: How to Rinse and Load Bio-Foam, Carbon and BIOMAX
How to rinse and load the AquaClear 110 media: Bio-Foam on the bottom, carbon on top, BIOMAX on the third level. Plus what the manual says about cleaning. - AquaClear 110 Setup: Quick Start Steps From the Manual
Setting up an AquaClear 110? Follow the manual’s quick start steps: media, intake tube, leveling, filling the case and priming on the lowest flow. - Air Pump Check Valve and Placement: Preventing Back-Siphoning
Where to put an aquarium air pump and why a check valve matters. Fluval’s manual on back-siphoning, safe placement, drip loops and removing the pump. - Air Pump Weak Airflow: Back Pressure and Flow Control Explained
Air pump airflow weak or dropping? Fluval’s manual explains back pressure, the flow control knob, multi-outlet valves and why airflow falls over time. - Air Pump Not Producing Air: What to Check
Air pump not producing air? Check the plug, the airline and valves, test the pump on its own, and look at the diaphragm. Steps from Fluval’s manual. - Cracked Glass Aquarium Heater: What to Do
Cracked glass on your aquarium heater? Unplug it, don’t use it again, don’t repair it, and check the guarantee. Here’s what Eheim’s manual says. - Wet Plug or Socket Near Your Aquarium: What the Manuals Say to Do
A wet plug or socket near your aquarium? The manuals say don’t unplug it. Switch off the fuse or breaker first. Plus drip loops and leak rules. - Aquarium Equipment Safety Checklist: What Manufacturer Manuals Say
A safety checklist for aquarium heaters, filters and air pumps, drawn from three manufacturer manuals: unplugging, cords, drip loops, RCDs and repairs.
How every guide is made
1
Find the official manual
We start from the manufacturer’s own documentation, not forum folklore.
2
Draft from the source
Each step traces back to the manual. If it isn’t there, it isn’t in the guide.
3
Check, source and date it
Every page lists its sources and when we last checked them.
Water and electricity: unplug first.
Every manufacturer manual we’ve read says the same thing: unplug your equipment before you put your hands in the tank. If a heater won’t switch off, start with our step-by-step guide.
Don’t see your equipment?
Tell us which model you’d like covered next. This site covers equipment only, not fish health or water chemistry.
